CBR TRIGGERS FOR for CROSMAN NPSS REMINGTON NPSS also fits Remington Genesis Remington Legacy with the plastic triggers THE GRT-III Trigger is used for the BENJI TRAIL  NP

NP stands for Nitrogen Piston
NPSS stands for Nitrogen Piston Short Stroke

 CBR Trigger is fully assembled with the parts below, adjusted and ready to drop in.
 

CBR TRIGGER
by Charlie

Crosman-Remington NPSS Triggers

The CBR Trigger is a true 2 stage adjustment trigger that when installed with the accompanying  reduces the trigger travel in both the first and second stage and reduces the trigger pull form 4-5 lbs down to about 1 lb 8 oz.

 The CBR Trigger blade is a space age Polymer composite trigger with a hardened steel reinforced pivot point to eliminate any concerns regarding wear. (The trigger is not plastic). The trigger blade also has a serrated finger pad for better trigger pull control.

The CBR Trigger is a two adjustment trigger. One adjusts the primary trigger pull length and the other adjusts the second stage sear let off point. The trigger pull weight is not adjustable but a replacement spring is included in the trigger kit to lighten the pull weight if so desired.

All triggers are pre-adjusted prior to shipping so they will be a true drop in trigger although they can be adjusted to the preference of customer. Keep in mind that because of being mass produced, the tolerances of triggers vary from gun to gun and minute adjustments may be required once it is installed.

Installation of the CBR Trigger is straight forward, very simple and takes just minutes to install and requires no special tools or experience. If you can turn a Philips screwdriver handle, you can install the CBR Trigger blade. Yes, it’s that simple.

You can review the CBR installation guide Here.

The CBR Trigger is designed to fit the following guns.

• Crosman NPSS ELS 177

• Crosman NPSS ELS 122

• Crosman NPSS ELS 177 DC

• Crosman NPSS ELS 122 DC

• Remington NPSS

• Remington R1K77PG (springer) 

• Remington Genesis (springer) w/late style trigger 

• Remington Legacy (springer) w/late style trigger

The Benjamin Trail NP series uses the GRT-III Benjamin Trail Series (all)

Will it work in my gun???
Check here to find out.

More will be included later as we determine what they will work in.

  The CBR is not available outside of the US
The CBR Trigger Blade is sold in the US only

CBR  trigger blade (US ONLY) $29.00 Shipping is Included GRT-III trigger blade  $32.00 Used for the Benjamin Trail Shipping is Included Thank you for your order.